Process revolution in the field of sheet metal processing

Laser cutting has gone through decades of development, from solid-state lasers, CO2 lasers to fiber lasers. Technology is becoming more and more mature, and China's huge potential market also provides a broad space for the large-scale application of laser processing machine tools in the sheet metal industry. With the intensification of competition, the profit margins at all stages of the sheet metal industry chain are shrinking, and the room for price reductions is decreasing. The transformation of processing technology is bound to be obtained. At the same time, China has gradually become an international manufacturing center. With the increase of foreign investment, metal The demand for processing continues to increase, so the demand for sheet metal processing capabilities is also increasing, which promotes the development and prosperity of laser cutting.

Shears for sheet metal processing:  

1 Examine the drawings and select relevant materials according to the requirements of the drawings. 

2 See the size and draw the line clearly, check it and then cut the material. 

3 Send the workpiece into the shearing machine through the worktable, first cut off the burrs, and then measure and draw the line with a tape measure. 

4. Align the drawing lines with the alignment light of the shearing machine. 

5 Use the foot pedal to control the movement of the tool. 

(Note:

1. The cutting edge of the shearing machine is low on the left and high on the right;
2. The shearing machine can not only cut plates but also cut rubber;
3. During the cutting process of the cutting edge of the shearing machine, the clamping device first clamps the workpiece and then cuts.
4. Hydraulic shearing machine model Q11Y-6*2500A (maximum thickness * width), HGN31/13 (13*3100mm). 

Suggest:

1. The shell of the pedal switch is seriously damaged and there is a safety hazard. It is recommended to perform regular maintenance on the pedal;
2. After the shearing machine completes the shearing, the workpiece falls directly on the floor from the back of the shearing machine, which is not only noisy, but also has certain damage to the workpiece. It is recommended to make a slanted double track or slope behind the shearing machine. The road makes the processed workpiece slide down along the track, reducing noise and damage. ) 

If you want to know more about sheet metal processing or CNC machining parts, you can search directly

http://www.runzehardware.cn,

Or send an email to melissazhang@runzehardware.cn